using snatch blocks to move heavy things

#Using snatch blocks to move heavy things how to

There is no specific reason why you should buy one over the other people choose which ever one works best for them, often based on personal preference. The difference between them is that a pulley block is constantly closed and you must thread the line through the axle while the snatch block is designed to open with a gate on the side so the wire rope can be fitted easily as shown in the below pictures.īoth, pulley and snatch blocks will help you to facilitate your lifting operations. Pulley blocks give direction to the rope while loaded they are able to increase the line pull or lifting capacity of a hoist or winch by multiplying the number of lines. Pulley blocks and snatch blocks are both pulley blocks these lifting tools have a wheel on an axle designed to help you lift heavy items up to 30 tonne.

Stainless Steel Blocks, Sheaves & Pulleys.

#Using snatch blocks to move heavy things how to

Refer to your winch manual on how to use the snatch block when recovering with your winch.Stainless Steel Blocks, Sheaves & Pulleys.

Always wear safety gear when performing recovery, including gloves and glasses.

The user shall determine a safe distance for all persons in the recovery

Safety of the user and others must be first priority.

Do NOT use this product if it is damaged in any way and always inspect prior to use.

Never exceed the snatch block or winch rope capacity.

Ensure snatch block is dry prior to being stored.

Always clean using PH neutral soapy water after use and rinse with fresh water.

The snatch block incorporates a precision machined steel bush with greasable axle.

If choker hole elongates, the maximum capacity has been exceeded and the snatch block should be.

Ensure retaining circlip is in place and secure.

Inspect before use for any damage, cracks or deformation.

Upswept tabs on the side plates offer additional rigidity but also allow for easy operation, even when wearing gloves.

Rounded edges assist with guiding the rope in and out of the snatch block but also prevents damage to both synthetic and wire ropes. The Bushranger® Snatch Block has a working load limit of 11,000kg with a minimum breaking strain of 18,000kg, giving you the peace of mind that no matter the situation it won’t let you down.ĭesigned with variable applications in mind, the snatch block incorporates a tapered pulley design that allows for multiple sized ropes to be used in the one product.

Independent testing has also been carried out at a NATA accredited laboratory to verify the design. The Bushranger® Snatch Block is engineered and field-tested in Australia by 4WD enthusiasts with many years of experience. Upswept tabs on the side plates offer additional rigidity but also allow for smooth operation, even when wearing gloves. Increasing the winch’s pulling power, a snatch block works to retrieve loads that are double a winch’s capacity by halving the load on the winch, also aids winching from different angles when straight isn’t an option.ĭesigned with variable applications in mind, the snatch block incorporates a tapered pulley design that allows for multiple sized ropes to be used in the one product. Providing multiple options in self-recovery situations, the Bushranger® Snatch Block is a 4×4 essential for single-vehicle recoveries using a winch. The Bushranger® Snatch Block has a working load limit of 11,000kg with a minimum breaking strain of 18,000kg, giving you the peace of mind that no matter the situation, it won’t let you down. The Bushranger® Snatch Block is engineered, and field-tested in Australia by 4WD enthusiasts with many years of experience.